Single Fluid Sanitary Filter Housing

Model: JTGDX

Brand: JHENTEN

JTGDX Single Fluid Sanitary Filter Housing

Detail Description

JTGDX Single Fluid Sanitary Filter is high quality sanitary grade filter which service for small flow rate.

JTGDX Single Fluid Sanitary Filter have good surface treatment and the maximum corrosion-resistant, in order to prevent the bacterial contamination, the unique structure of the sanitary filter housing ensure inside and outside surface have no dead corner and conforms to the requirements of GMP, The filter housing can completely disassemble and washing, easy to operating.

Feature

The high level of Polishing, inner surface≤0.3 um Ra, outside surfce can meet 0.4 um, it is absolute hygienic level polishing
Useing strong Quick-open design, the highest operate pressure up to 1.0MPa
Special vent valve and drain valve: thread sleeve and the tower joint keep separate, the connect hose can not rotate during pressure elease and fluid discharge
The legs of filter useing strengthening screw, not easy to be slided, more durable; the bottom of the legs can option install adjusting screw , can adjust the height of the filter, it is convenient to use.

Application

The pharmaceutical industry: pre filter various antibiotics liquor
Food and beverage industry: alcohol, mineral water, drinking water filtration
oil industry: oil field water injection filter
Electronic Industry: high purity water pre filtration
Chemical Industry: all kinds of organic solvent, acid, lye filter

Surface Finish

Finish Type	Mechanical polishing, Electrolytic polishing, Sand blasting, pickling
Polishing precision	Inner surface Ra≤0.3μm , Outside surface Ra≤0.4μm.

Operating Conditions

Max Operating pressure	0.6MPa、1.0MPa
Max Operating Temp.	150℃
Disinfect	Online or steam sterilization： 121℃/30min

Material

Shell	304, 316L
Vent valve	304, 316L
Quick-open	304
Stabilizer blade	304
O-ring	EPDM, PTFE, Viton, Silicone

Connection

Shell connection	Tri-Clamp
In-outlet N1, N2	Tri-Clamp
N3Pressure gauge (optional)	1.5” Tri-clamp
N4Vent valve (optional)	Φ6 Screw thread
N5Drain valve (optional)	Φ6 Screw thread
Cartridges connection	222型, 226型

Structure

Dimension Parameters	1pc
Dimension Parameters	5”	10”	20”	30”
A：Total height	490	615	865	1115
B：The distance from inlet to center	110
C：Shell diameter	Φ101.6
D：N1, N2 The height from in-outlet to ground	170

The above-mentioned data is the standard, it can customize according tocustomer's requirements.

SelectionTable

	［Qty. of Cartridge］	［Model of Cartridge］	［Cartridges connection］	［Shell Material］	［In-outlet connection］	［O-ring］
JTGDX	1R	20	S	4	K	E
	1R=1pc	5=5” Cartridge	S=226 type	4= 304	K= Tri-clamp	E=EPDM
		10=10” Cartridge	T=222 type	6= 316L		P=PTFE
		20=20” Cartridge				V=Viton
		30=30” Cartridge				S=Silicone

Online Enquiry

Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.info@jhenten.com, also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)